Do It Yourself Air Filtering Mask

When air is polluted both indoors and out, when people use fragrances and other products with toxic chemicals, when we are made ill and disabled by the pollutants, then we can’t wait for better regulations to take effect, we need to do something to protect our health now.

Sometimes we can buy masks that work for us, especially if we tolerate synthetic materials, but sometimes making our own is the only way. When we make our own, we can use safe-for-us fabrics and even coordinate them to our outfits (if we’re lucky enough to have safe-to-wear outfits).

Some people use scarves as masks. You can sew a pouch on the inside to hold filtering material of your choice. You can find some safe(r) textile sources here if you are looking for new materials, otherwise it’s great to recycle some old clothes!

Here’s a great pattern and instructions for making your own masks (as seen below).

As you see in her photo, the masks can be made in different sizes and fun fabrics.

In some cases, it’s sufficient to have a few layers of washable fabric for filtering, other times activated carbon may be a better option.

One place you can buy carbon impregnated fabrics is from Daliya at Nirvana Safe Haven (nontoxic.com). I have no financial interest (NFI), but have bought a few things from her in the past. Daliya has been providing materials to the MCS community for many years.

Some masks are made to use a replaceable (or refillable) activated carbon chunk filter, but I don’t have a scanner to scan my pattern copy now. I’ll add it when I can.

If you do make such a pouch to insert in your mask, please make sure you use only virgin activated carbon, and without potassium permanganate or potassium iodide added. You can buy small quantities of chunky carbon from Foust in the US.

Due to the serious pollution that manufacturing of our toxic, disposable stuff there causes, we can look to Asia for all kinds of creative mask designs. Here we experience the indoor air pollution that the stuff causes, in addition to harmful fragrance chemicals everywhere. We may as well have some fun when we’re being polluted to death, as these (and other) masks can only offer us a bit of protection, perhaps while we run errands. Ultimately, we need regulations that give us the right to a healthy environment.

Wishing you all safe, clean air to breathe.

NOTE that DIY masks are better than no protection at all, but will only offer minimal  protection. For serious protection, we need respirators with proper filters for whatever pollutants are in the air we need to breathe (and absorb through our skin).

Please see this post from the CDC on NIOSH-approved respirators, which must filter out a minimum of 95% to be approved. Some filter only particulate, others filter oils and gases too. Keep in mind that smoke and many other pollution events have both particulates and toxic gases.

https://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/default.html

 

May our air be clean, safe, and healthy to breathe!

Advertisements

11 responses to “Do It Yourself Air Filtering Mask

  1. It is getting so even those without breathing difficulties benefit from having and using a filtering mask. Thanks for the info!

  2. This is really useful, thank you. I’ve had to sleep a few time with a mask on lately because of woodsmoke. I have so many different types but they’re all too thick or cumbersome for sleeping in.

  3. Ooooh, can you tell me why not to have one with pottassium permanganate/iodide? I know that the permanganate adsorbs smaller VOC’s so can be important for things like formaldahyde – I have an air filter with it in. Is it dangerous to have it too close to your skin?

    • For something directly against our face and noses, it’s best to play it safe.
      One of the potassium additives is a major lung irritant and shouldn’t even be used in residential machines! I can’t find that research anymore, and I forget which one it was.

      These masks are mostly nuisance masks, they are not going to protect us from serious exposures.

      Even the respirators can only do so much. Our eyes and skin also absorb toxic chemicals, so depending on the level of protection we need, we will have to take appropriate measures, if they even exist.

      If we don’t tolerate synthetics, no appropriate measures exist now to make regular environments safe for all of us. That will only happen by regulations and ensuring people have the right to a healthy environment, which only a few countries no not provide (US, Canada, AU, China being among those who do not)

  4. Looks like a good idea for most anyway. My carbon filtered breathing masks are ‘air tight’ so as not to let in any ‘unfiltered’ air, they’re disposable (after several uses (that’s if you dont wear it for a long time in exposures of course). I had’nt even got around to thinking about the ‘recycling aspect’ but I like the idea of ‘making your own’ ♡ I’m only worried about the level of protection I need and if I would be able to make an ‘air tight’ version. I use the 3M 9926 model because that’s what they recommend here in Spain for severe/disabled MCS sufferers. I have troubles breathing if I wear it for too long or try to talk too much and can’t wear it in the heat because the material reacts with the sweat it causes and gives me rashes and outbreaks all oround my nose, mouth and chin ( I try to put some organic cotton between my face and the mask to avoid this ) so maybe if I get some organic material to make a ‘cover’ it may just work : )

    They say we should ‘avoid’ wood fires alltogether but I have one and I find that as long as it’s burning and the ‘pull’ is good I have no problems (unless it smokes of course) but when it’s not in use we ‘seal it off’ because the fumes that come from it make me VERY ill. I always have a window open throughout the night too, especially if the chimneys open. I know I loose a lot of ‘heat’ this way but it’s the only heating wr have and the only way I can live with it. I can’t imagine having to sleep with a mask on, I really hope you can find a solution to your chimney too♡♡♡

    • These are nuisance level masks, but for some of us, all we can use, if we don’t tolerate synthetic materials against our bodies or in the air.

      I forgot to add that sewing in a seam at the top where we can insert a piece of something with wire (such as the ones that many cookie or coffee bags come with) or piece of flexible metal to be able to pinch closer around the top of our noses, can make these a little easier to use -not always needing a hand to hold if the air gets particularly bad…

  5. Pingback: When We HAVE to Wear A Mask to Breathe and Function | Seriously "Sensitive" to Pollution

  6. A reminder that cloth masks are merely better than nothing, especially when we don’t tolerate synthetics against our skin…

    Millions rely on cheap cloth masks that may provide little protection against deadly air pollution

    …”Is it possible to design an affordable mask that provides better protection? Probably. But until that happens, we cannot allow users of these masks to assume they are completely protected from air pollution. A number of these masks provide at least some protection, which is better than nothing. But people should also moderate their exposure by making choices such as whether to smoke, where to live, and whether to travel along traffic-clogged streets, while we work over the longer term to reduce air pollution at the source.”

    https://theconversation.com/millions-rely-on-cheap-cloth-masks-that-may-provide-little-protection-against-deadly-air-pollution-64791

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s